Road safety kerb paint is a high-performance reflective coating applied to road kerbs, medians, traffic islands and road edges to improve visibility and guide motorists especially during nighttime and adverse weather conditions. By creating clear visual boundaries, kerb paint helps reduce accidents, enhances lane discipline and contributes to safer road infrastructure.
Methods of application
Water based paint can be applied using a brush , roller or sprayer
Ensure air and surface tmeperature is abover 10°C
Avoid application if humidity is above 85% temperature is falling or rain is imminent
Clean the surface thoroughly before application
Stir well before use
Apply one coat allow 2-3 hour gap
On a new surfaces use a recommended primer before application
Open paint conatiner and mix thoroughly using a hand mixer or stir stick . Alternatively, keep the continer upside down for a few hours before use.
Mistakes to avoid
Painting in direct sun/heat
Starting second coat too soon
Skipping primer on stains
Specifications
Recommended film thickness: 0.150 mm ( wet)
Coverage : 6-8m²/litre, single coat (varies with kerb porosity and surface profile)
Specific gravity (SG) :1.3 approx
Application temperature : minimum 85%
Drying time : 10-15 minutes (touch dry)
Colurs available : white, yellow , red , blue , green , black and more
